We are looking for more operators and set-ups for our CNC machines at IPL in Lem, starting up as soon as possible.
Denne stilling er desværre ikke længere ledig.
Se alle ledige stillinger
Lem St
We are a company in Lem St. which has our own foundry and our own machine factory. We are one of Europe's largest manufacturers of CNC machined items and supplier of complex items. We manufacture complete solutions, where we produce all sub-elements, surface treatment, assemble and deliver the agreed products.
About the job
The tasks consist of setting up items for machining (both turning and milling) or operating
CNC machines. Therefore, it is an advantage if you have experience in Okuma, Mazak, Heller or Spinner machines. We also have some Kawasaki robot cells - but that's not a requirement. After the machines have been programmed, you can help to monitor the production to make sure it runs as planned.
To ensure our high quality and accuracy, the items must be measured and controlled. These measurements are entered on a computer. It is also possible to contribute to the optimization of the robots, so they are utilized in the best way.
Qualifications and competencies
- You are a trained industrial technician or machinist
- You have knowledge of CNC machines and production in steel
- You can read drawings
- You thrive in a working day where there is speed
- You have a good mood and can cooperate with colleagues
- You are proud of your own work
We offer
- An exciting position with the opportunity to make your own mark
- Good opportunities for personal and professional development
- An informal and collaborative work climate where we have focus on well-being
Working hours: Day shifts, evening shifts or night shifts
Start: As soon as possible
We look forward to hearing from you
Send your application, CV and relevant attachments to email: [email protected]. Write "CNC operator" in the subject field. We regularly call relevant candidates, so we encourage you to apply as soon as possible.
If you have questions about the job, you are welcome to contact production manager
Lars B. Sørensen on +45 26345965.
All inquiries are treated confidentially.
Kilde: Jobnet.dk
About the job
The tasks consist of setting up items for machining (both turning and milling) or operating
CNC machines. Therefore, it is an advantage if you have experience in Okuma, Mazak, Heller or Spinner machines. We also have some Kawasaki robot cells - but that's not a requirement. After the machines have been programmed, you can help to monitor the production to make sure it runs as planned.
To ensure our high quality and accuracy, the items must be measured and controlled. These measurements are entered on a computer. It is also possible to contribute to the optimization of the robots, so they are utilized in the best way.
Qualifications and competencies
- You are a trained industrial technician or machinist
- You have knowledge of CNC machines and production in steel
- You can read drawings
- You thrive in a working day where there is speed
- You have a good mood and can cooperate with colleagues
- You are proud of your own work
We offer
- An exciting position with the opportunity to make your own mark
- Good opportunities for personal and professional development
- An informal and collaborative work climate where we have focus on well-being
Working hours: Day shifts, evening shifts or night shifts
Start: As soon as possible
We look forward to hearing from you
Send your application, CV and relevant attachments to email: [email protected]. Write "CNC operator" in the subject field. We regularly call relevant candidates, so we encourage you to apply as soon as possible.
If you have questions about the job, you are welcome to contact production manager
Lars B. Sørensen on +45 26345965.
All inquiries are treated confidentially.
Kilde: Jobnet.dk
Information og data
Denne ledige stilling har jobtypen "Hardwarespecialist", og befinder sig i kategorien "Informationsteknologi".
Arbejdsstedet er beliggende i Lem St.
Jobbet er oprettet på vores service den 7.1.2022, men kan have været deaktiveret og genaktiveret igen.
Dagligt opdateret: Dette job opdateres dagligt ud fra jobudbyderens hjemmeside via vores søgemaskineteknologi og er aktivt lige nu.
- Hardwarespecialist
- Lem St
- Torsdag den 03. marts 2022
Lignende jobs
-
CNC-operatør søges til vores kunde i Vinderup
Vi søger lige nu 2 dygtige CNC-operatører til vores kundes CNC-afdeling i Vinderup.Stillingerne er på nathold og weekendhold, med opstart hurtigst muligt i et try & hire-forløb.Har du erfar..- Hardwarespecialist
- Holstebro
Statistik over udbudte jobs som hardwarespecialister i Lem St
Herunder ser du udviklingen i udbudte hardwarespecialist i Lem St over tid. Bemærk at jobs der ikke har en bestemt geografi ikke er medtaget i tabellen. I den første kolonne ser du datoen. I den næste kolonne ser du det samlede antal hardwarespecialister.
Se flere statistikker her:
Statistik over udbudte hardwarespecialister i Lem St over tid
Dato | Alle jobs som hardwarespecialister |
---|---|
20. december 2024 | 1 |
19. december 2024 | 1 |
18. december 2024 | 1 |
17. december 2024 | 1 |
16. december 2024 | 1 |
15. december 2024 | 1 |
14. december 2024 | 1 |
13. december 2024 | 1 |
12. december 2024 | 1 |
11. december 2024 | 1 |
10. december 2024 | 1 |
9. december 2024 | 1 |
8. december 2024 | 1 |
7. december 2024 | 1 |
6. december 2024 | 1 |
5. december 2024 | 1 |
4. december 2024 | 1 |
3. december 2024 | 1 |
2. december 2024 | 1 |
1. december 2024 | 1 |
30. november 2024 | 1 |
29. november 2024 | 1 |
28. november 2024 | 1 |
27. november 2024 | 1 |
26. november 2024 | 1 |
25. november 2024 | 1 |
Populære søgninger
Lignende søgeresultater
Manager, Hardware Quality -
, Global Quality
Frederikshavn, Danmark: Elektroniktekniker/datatekniker til
s inspektionsskibe - Frederikshavn, Danmark. Væ...
Se alle populære søgninger