Mechanical Design Engineer, Elche, Spain (V215)
Denne stilling er desværre ikke længere ledig.
Se alle ledige stillinger
Udlandet
PLD Space, Elche, Spain, is looking for a Mechanical Design Engineer.
Description
Required competences
Valued competences
How to apply?
Read the vacancy and apply online:
https://pldspace.com/en/career/propulsion-components-design-and-analysis-engineer
Latest application date is 30.07.2021.
(from EURES Spain)
----------------------------------------------------------------------
About PLD Space
We develop launch technologies to provide commercial suborbital and orbital access to space services with our launchers MIURA 1 and MIURA 5. Our believe is that boosting the small satellite industry, mankind will benefit of …… PLD Space is highly committed on providing space launch services dedicated to small payloads and small satellites.
Our Vision
Vision is the imaginative anticipation of the future of the organization, based on the knowledge of our environment and its development trends. PLD Space vision is: “To become an engineering, manufacturing and services company, with a wide knowledge of space launcher technologies, and with the aim of becoming a main actor in the space launch services in the international mark"
EURES står for European Employment Service og er et tilbud til alle EU-borgere, der ønsker at arbejde i et andet EU/EØS-land. Her finder du job i udlandet og information om jobsøgning i udlandet.
http://www.eures.dk eller http://www.europa.eu/eures
Følg os på Facebook "EURES Danmark"
Kilde: Jobnet.dk
Description
- As part of a small, passionate, and accomplished team, you will be responsible for designing launch vehicle Propulsion elements and configurations in concert with Structures subsystem. Specific focus on Propellant lines design.
- Responsibilities
- Participate in subsystem design and architecture of pressure-fed liquid rocket engine, including component sizing, loads determination, and detailed design.
- Design of primary metallic structures (different size range of machined components, sheet metal parts) for propellant lines (cryogenics, fuel and gas) fitting.
- Design of secondary structures as brackets or supports for rigid pipes, valves, mechanism, propulsion components electrical harness, etc.
- Generation of Engineering documentation such as 3D models, Drawings, BOMs, and Eng. Change Notes for the complete definition of Detailed Parts, Assemblies, and Installation.
- Maintain and improve program standard approaches to design, safety factors, material allowables, drafting standards, etc.
- Liaise with others Engineering departments (Structures design and stress, M&P, Quality, etc.) and provide information to the Manufacturing area under request.
- Responsible to accomplish with specifications and requirements during the development of the assigned tasks or product design along the entire lifecycle and across all phases from Prototype, Testing and Series production.
- Participate in the periodic design reviews dealing with SCH/Manufacturing for the achievement of requirements, specifications, feasibility, lead time and prices.
- Continuous research to optimize design solutions.
- Identify and recommend opportunities to reduce costs and improve efficiency.
- Complete the assigned tasks “on time, on quality, on cost".
Required competences
- Aerospace or Mechanical Engineering Bachelor’s degree or demonstrable relevant experience in lieu thereof.
- Minimum 3 years of relevant technical experience.
- Demonstrated experience in design metallic structures for propellant lines.
- Knowledge in selection and application of design criteria and rules, materials, strengths, and other mechanical properties, according to the loading conditions, working environment, etc.
- High degree of CAD competence and PDM tools.
- Fluent written and oral communication both in Spanish and English
Valued competences
- Previous experience in Aerospace Industry as Propulsion design & analysis engineer or Structural Design Engineer (or an equivalent combination of education and experience).
- Familiar with Aerospace standards
- Familiar with the main manufacturing technologies and capabilities
- Knowledge of the most common corrosion prevention rules and surface protection.
- Knowledge of the most common cryogenic (LOX) cleaning procedures.
- Knowledge of Cryogenic (LOX) manipulation.
- Proven in the development of products from the original concept design according to Aerospace normative and rules, through to the delivery of detailed technical design packaging into final production.
- Design focused to assembly line concerns, tooling, and jigs.
- Familiar with Aerospace standard parts and typical light materials, metallic and non-metallic.
- Preferred software: Siemens NX and Teamcenter.
- An occasional need to travel with the role will be required.
- Self-motivated and able to work under pressure to meet deadlines, dealing with situations that are constrained by time and managing different tasks at once.
- Able to work autonomously with little supervision.
How to apply?
Read the vacancy and apply online:
https://pldspace.com/en/career/propulsion-components-design-and-analysis-engineer
Latest application date is 30.07.2021.
(from EURES Spain)
----------------------------------------------------------------------
About PLD Space
We develop launch technologies to provide commercial suborbital and orbital access to space services with our launchers MIURA 1 and MIURA 5. Our believe is that boosting the small satellite industry, mankind will benefit of …… PLD Space is highly committed on providing space launch services dedicated to small payloads and small satellites.
Our Vision
Vision is the imaginative anticipation of the future of the organization, based on the knowledge of our environment and its development trends. PLD Space vision is: “To become an engineering, manufacturing and services company, with a wide knowledge of space launcher technologies, and with the aim of becoming a main actor in the space launch services in the international mark"
EURES står for European Employment Service og er et tilbud til alle EU-borgere, der ønsker at arbejde i et andet EU/EØS-land. Her finder du job i udlandet og information om jobsøgning i udlandet.
http://www.eures.dk eller http://www.europa.eu/eures
Følg os på Facebook "EURES Danmark"
Kilde: Jobnet.dk
Information og data
Denne ledige stilling har jobtypen "Maskiningeniør", og befinder sig i kategorien "Industri, håndværk og teknik".
Arbejdsstedet er beliggende i Udlandet
Jobbet er oprettet på vores service den 28.5.2021, men kan have været deaktiveret og genaktiveret igen.
Dagligt opdateret: Dette job opdateres dagligt ud fra jobudbyderens hjemmeside via vores søgemaskineteknologi og er aktivt lige nu.
- Maskiningeniør
- Udlandet
- Fredag den 30. juli 2021
Lignende jobs
-
Maskiningeniør i Udlandet
Company Description IFS is a billion-dollar revenue company with 6000+ employees on all continents. Our leading AI technology is the backbone of our award-winning enterprise software solutions,.Få mere info- Maskiningeniør
- Udlandet
Statistik over udbudte jobs som maskiningeniør i Udlandet
Herunder ser du udviklingen i udbudte maskiningeniør i Udlandet over tid. Bemærk at jobs der ikke har en bestemt geografi ikke er medtaget i tabellen. I den første kolonne ser du datoen. I den næste kolonne ser du det samlede antal maskiningeniør i Udlandet.
Se flere statistikker her:
Statistik over udbudte maskiningeniør i Udlandet over tid
| Dato | Alle jobs som maskiningeniør |
|---|---|
| 3. juli 2024 | 1 |
| 2. juli 2024 | 1 |
| 1. juli 2024 | 1 |
| 30. juni 2024 | 1 |
| 29. juni 2024 | 1 |
| 28. juni 2024 | 1 |
| 27. juni 2024 | 1 |
| 26. juni 2024 | 1 |
| 25. juni 2024 | 1 |
| 24. juni 2024 | 1 |
| 23. juni 2024 | 1 |
| 22. juni 2024 | 1 |
| 21. juni 2024 | 1 |
| 20. juni 2024 | 1 |
| 19. juni 2024 | 1 |
| 18. juni 2024 | 1 |
| 17. juni 2024 | 1 |
| 16. juni 2024 | 1 |
| 15. juni 2024 | 1 |
| 14. juni 2024 | 1 |
| 13. juni 2024 | 1 |
| 12. juni 2024 | 1 |
| 11. juni 2024 | 1 |
| 10. juni 2024 | 1 |
| 9. juni 2024 | 1 |
| 8. juni 2024 | 1 |
| 7. juni 2024 | 1 |
| 6. juni 2024 | 1 |
| 5. juni 2024 | 1 |
| 4. juni 2024 | 1 |
| 3. juni 2024 | 1 |