Manufacturing Assembly Specialist
Denne stilling er desværre ikke længere ledig.
Se alle ledige stillinger
Århus N
Are you ready to take the next step in your career? Can you see yourself working within a department where we constantly develop our processes and products horizontally within a very wide scope? If so, we've got the opportunity for you!
Product Functions Transport, Construction & Maintenance (PFTCM) is a department within Vestas R&D organization, Vestas Power Solutions (VPS). VPS is a cornerstone of Vestas and is shaping the future of modern energy by developing and maturing new products and technologies. The main responsibility for PFTCM is to contribute to the possibility of transporting, constructing, and maintaining wind turbines all over the world - also in remote areas in challenging terrain. We push the boundaries of what's possible to allow turbines and components to grow and push the known boundaries for size, shape, and weight. To do this we constantly look for new ways to transport and construct faster, cheaper and under harsher conditions. We are important contributors to allowing wind power to go to parts of the world where electricity is in short demand.
Responsibilities
The primary task and responsibility for a Manufacturing Assembly Specialist in PFTCM is to develop, design and optimize high level manufacturing processes in close collaboration with relevant stakeholders. Further to define requirements for new processes or equipment, troubleshooting and to identify and implement process improvements. Key to the role is that the Manufacturing Assembly Specialist has full ownership and leads the development from concept and requirement specification on to final verification of prototype.
An example of a project for the Manufacturing Assembly Specialist could be to develop the best setup for onsite assembly. When deciding on a site for a wind turbine or a park of turbines we obviously look at the wind conditions for the site. These conditions might be fantastic for the turbine to produce electricity - but not necessarily for transportation of the components or for us to construct the turbine at site. In this case the task is to come up with concepts and best possible assembly processes. A typical development process could like this:
Qualifications
Competencies
To become a success in this position you should be an engineer by heart. We imagine that you are the type of person who has your kitchen draws organized in a very specific way; and you know why - and when you look at new things, you always see opportunities for improvements and optimization. What is key, is that you should be comfortable with proposing new solutions, also if the solution is proven to not be suitable. You must be able to do this in a structured and methodical way based on your theoretical and technical knowledge and experience.
In addition, it is key that you are aware that you will be part of a huge value chain and you will play an important part in making the value chain work. This means that you must be comfortable with not doing everything yourself - hence delegating, share or even outsourcing parts or full components to colleagues, partners, or suppliers. This requires an ability to both be technically detailed, while at the same time keeping the full overview and performing a project manager function towards suppliers and stakeholders.
What we offer
We offer an exciting job with great opportunities for professional and personal development in an inspiring environment as part of the world's leading wind turbine manufacturer. You will become part of a highly professional environment with a broad interface and work closely with colleagues from all parts and levels of the organization. We value initiative and willingness to take ownership.
Additional information
Your work location will be at Vestas office at Aarhus, DK. Up to 2-4 weeks/year is expected.
Applications are handled on an ongoing basis. Please apply online with your letter of motivation and CV as soon as possible – and no later than 20th May 2021.
If you have specific questions about the position, please contact Michael Christensen (Head of TCM & Operational Readiness) via phone +45 20702500
All inquiries are treated confidentially.
About Vestas
Vestas is proud to be the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and we have installed more wind power than anyone else.
Vestas strives to be the most inclusive workplace in the sustainable energy industry and ensure equal opportunities for everyone regardless of the social identity. We are stronger as a company not despite our differences, but because of them, both professionally and personally. Beyond a diverse workforce, we want to ensure that all of our employees are included and actively contributing to Vestas’ success and innovation. Only then can we become the global leader in sustainable energy solutions and ensure sustainability in everything we do.
At Vestas, we offer global opportunities for people with growth mindsets and the desire to make a shared and positive impact. We work in the true spirit of our corporate values: accountability, simplicity, collaboration, and passion. We expect everyone to live up to these in their day to day work – no matter what you do and where you are in the organisation.
Learn more about Vestas at www.vestas.com and follow us on our social media channels
Product Functions Transport, Construction & Maintenance (PFTCM) is a department within Vestas R&D organization, Vestas Power Solutions (VPS). VPS is a cornerstone of Vestas and is shaping the future of modern energy by developing and maturing new products and technologies. The main responsibility for PFTCM is to contribute to the possibility of transporting, constructing, and maintaining wind turbines all over the world - also in remote areas in challenging terrain. We push the boundaries of what's possible to allow turbines and components to grow and push the known boundaries for size, shape, and weight. To do this we constantly look for new ways to transport and construct faster, cheaper and under harsher conditions. We are important contributors to allowing wind power to go to parts of the world where electricity is in short demand.
Responsibilities
The primary task and responsibility for a Manufacturing Assembly Specialist in PFTCM is to develop, design and optimize high level manufacturing processes in close collaboration with relevant stakeholders. Further to define requirements for new processes or equipment, troubleshooting and to identify and implement process improvements. Key to the role is that the Manufacturing Assembly Specialist has full ownership and leads the development from concept and requirement specification on to final verification of prototype.
An example of a project for the Manufacturing Assembly Specialist could be to develop the best setup for onsite assembly. When deciding on a site for a wind turbine or a park of turbines we obviously look at the wind conditions for the site. These conditions might be fantastic for the turbine to produce electricity - but not necessarily for transportation of the components or for us to construct the turbine at site. In this case the task is to come up with concepts and best possible assembly processes. A typical development process could like this:
- Ideation for new concepts and solutions
- Process mapping
- Proof of concept using models or simulation
- Definition of product and module level requirements and performance
- Stakeholder involvement to ensure full value chain buy-in
- Guiding and follow up with other departments development process to ensure compliance to product level requirements
- On site verification of the product and module performance
Qualifications
- Relevant engineering degree e.g. Production Engineering or Mechanical Design (M.Sc.)
- Experience working within and designing manufacturing processes to combine components or raw material into a finished product
- Experience working with Lean principles
- Experience in simulation of manufacturing systems
Competencies
To become a success in this position you should be an engineer by heart. We imagine that you are the type of person who has your kitchen draws organized in a very specific way; and you know why - and when you look at new things, you always see opportunities for improvements and optimization. What is key, is that you should be comfortable with proposing new solutions, also if the solution is proven to not be suitable. You must be able to do this in a structured and methodical way based on your theoretical and technical knowledge and experience.
In addition, it is key that you are aware that you will be part of a huge value chain and you will play an important part in making the value chain work. This means that you must be comfortable with not doing everything yourself - hence delegating, share or even outsourcing parts or full components to colleagues, partners, or suppliers. This requires an ability to both be technically detailed, while at the same time keeping the full overview and performing a project manager function towards suppliers and stakeholders.
What we offer
We offer an exciting job with great opportunities for professional and personal development in an inspiring environment as part of the world's leading wind turbine manufacturer. You will become part of a highly professional environment with a broad interface and work closely with colleagues from all parts and levels of the organization. We value initiative and willingness to take ownership.
Additional information
Your work location will be at Vestas office at Aarhus, DK. Up to 2-4 weeks/year is expected.
Applications are handled on an ongoing basis. Please apply online with your letter of motivation and CV as soon as possible – and no later than 20th May 2021.
If you have specific questions about the position, please contact Michael Christensen (Head of TCM & Operational Readiness) via phone +45 20702500
All inquiries are treated confidentially.
About Vestas
Vestas is proud to be the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and we have installed more wind power than anyone else.
Vestas strives to be the most inclusive workplace in the sustainable energy industry and ensure equal opportunities for everyone regardless of the social identity. We are stronger as a company not despite our differences, but because of them, both professionally and personally. Beyond a diverse workforce, we want to ensure that all of our employees are included and actively contributing to Vestas’ success and innovation. Only then can we become the global leader in sustainable energy solutions and ensure sustainability in everything we do.
At Vestas, we offer global opportunities for people with growth mindsets and the desire to make a shared and positive impact. We work in the true spirit of our corporate values: accountability, simplicity, collaboration, and passion. We expect everyone to live up to these in their day to day work – no matter what you do and where you are in the organisation.
Learn more about Vestas at www.vestas.com and follow us on our social media channels
Information og data
Denne ledige stilling har jobtypen "Afdelingsleder", og befinder sig i kategorien "Ledelse og personale".
Arbejdsstedet er beliggende i Århus N.
Jobbet er oprettet på vores service den 21.4.2021, men kan have været deaktiveret og genaktiveret igen.
- Afdelingsleder
- Århus N
Lignende jobs
-
Head of QA/RA
About the job If you are experienced with quality assurance and regulatory affairs, love working in specialized teams, and you love working with mission-critical Medical Device software solutions..Få mere info- Afdelingsleder
- Århus
-
Danish Team Lead - Transport Infrastructure & Mobi...
<p>We are seeking a highly motivated and experienced leader to head our Danish Transport Infrastructure & Mobility team. You will play a pivotal role in growing the team, expanding our client..Få mere info- Afdelingsleder
- Århus N
-
Praktik hos [xxxxx] Management Consulting, Sustain...
<p>Ønsker du at prøve kræfter med konsulentrollen, udvikle dine analytiske evner og bidrage til at guide både private og offentlige samfundsaktører mod økonomiske, socialt og miljømæssigt bær..Få mere info- Afdelingsleder
- Århus N
-
Praktik hos [xxxxx] Management Consulting, Social ...
<p><em>Aarhus/København, Danmark</em></p><p>Drømmer du om en praktik, hvor du udvikler dig fagligt og personligt, og som giver dig rigtig gode muligheder for at bringe..Få mere info- Afdelingsleder
- Århus N
Statistik over udbudte jobs som afdelingsleder i Århus N
Herunder ser du udviklingen i udbudte afdelingsleder i Århus N over tid. Bemærk at jobs der ikke har en bestemt geografi ikke er medtaget i tabellen. I den første kolonne ser du datoen. I den næste kolonne ser du det samlede antal afdelingsleder.
Se flere statistikker her:
Statistik over udbudte afdelingsleder i Århus N over tid
| Dato | Alle jobs som afdelingsleder |
|---|---|
| 20. september 2024 | 56 |
| 19. september 2024 | 56 |
| 18. september 2024 | 55 |
| 17. september 2024 | 55 |
| 16. september 2024 | 56 |
| 15. september 2024 | 56 |
| 14. september 2024 | 56 |
| 13. september 2024 | 57 |
| 12. september 2024 | 58 |
| 11. september 2024 | 58 |
| 10. september 2024 | 58 |
| 9. september 2024 | 58 |
| 8. september 2024 | 58 |
| 7. september 2024 | 58 |
| 6. september 2024 | 58 |
| 5. september 2024 | 58 |
| 4. september 2024 | 58 |
| 3. september 2024 | 57 |
| 2. september 2024 | 57 |
| 1. september 2024 | 57 |
| 31. august 2024 | 57 |
| 30. august 2024 | 57 |
| 29. august 2024 | 57 |
| 28. august 2024 | 58 |
| 27. august 2024 | 53 |
| 26. august 2024 | 56 |
| 25. august 2024 | 56 |
| 24. august 2024 | 57 |
| 23. august 2024 | 57 |
| 22. august 2024 | 57 |
| 21. august 2024 | 56 |