CNC OPERATOR FOR DAY / NIGHT / EVENING / WEEKENDS
Denne stilling er desværre ikke længere ledig.
Se alle ledige stillinger
Lem St
We are looking for operators for our CNC machines at IPL in Lem I Denmark.
About the job
The tasks consist of setting up items for machining (both turning and milling) or operating
CNC machines. Therefore, it is an advantage if you have experience in Okuma, Mazak,
Heller or Spinner machines. We also have some Kawasaki robot cells - but that's not a
requirement. After the machines have been programmed, you can help to monitor the production to make sure it runs as planned.
To ensure our high quality and accuracy, the items must be measured and controlled. These measurements are entered on a computer. It is also possible to contribute to the optimization of the robots, so they are utilized in the best way.
Qualifications and competencies
We offer
Moving to Denmark
If you dream of moving to Denmark, there will be good opportunities for that. There will also be an opportunity to get help finding a job for your partner, as well as a home and school for the children.
Read more on the municipality's website: https://www.flytmodvest.dk/english
We look forward to hearing from you
Send your application, CV and relevant attachments to email: [email protected]. Write "CNC operator" in the subject field. We regularly call relevant candidates, so we encourage you to apply as soon as possible.
I the application you have to write if you are looking for day, evening, night or weekend shift.
If you have questions about the job, you are welcome to contact factory manager:
Poul Henrik Jespersen at +45 40 25 48 03
All inquiries are treated confidentially.
IPL Group consists of 3 high-tech companies: IPL, Ferrodan and Dana-Tank
We manufacture and offer technical solutions within castings, machined transmission elements and machine components, compressed air tanks and industrial tanks, which are sold in more than 40 countries - always based on the highest quality and the well-known quality brand IPL crown. IPL Group employs approx. 180 employees.
Kilde: Jobnet.dk
About the job
The tasks consist of setting up items for machining (both turning and milling) or operating
CNC machines. Therefore, it is an advantage if you have experience in Okuma, Mazak,
Heller or Spinner machines. We also have some Kawasaki robot cells - but that's not a
requirement. After the machines have been programmed, you can help to monitor the production to make sure it runs as planned.
To ensure our high quality and accuracy, the items must be measured and controlled. These measurements are entered on a computer. It is also possible to contribute to the optimization of the robots, so they are utilized in the best way.
Qualifications and competencies
- Prioritizes safety highly
- Ensures that the quality of what you do meets the specifications
- Can use measuring equipment
- Can read drawings
- Ensure adheres to delivery times
- Comes with suggestions for efficiency improvements
- Ensure high 'housekeeping' level on and around equipment
We offer
- Salary during illness
- Pension
- An exciting position with the opportunity to make its own mark in terms of optimizing production performance
- Good opportunities for personal and professional development, with a focus on lean tools
- An informal and collaborative work environment where we value collaboration and well-being
- Good colleagues who will ensure support, training and introduction to your work area
- Onboarding-plans for working at IPL and moving to Denmark
Moving to Denmark
If you dream of moving to Denmark, there will be good opportunities for that. There will also be an opportunity to get help finding a job for your partner, as well as a home and school for the children.
Read more on the municipality's website: https://www.flytmodvest.dk/english
We look forward to hearing from you
Send your application, CV and relevant attachments to email: [email protected]. Write "CNC operator" in the subject field. We regularly call relevant candidates, so we encourage you to apply as soon as possible.
I the application you have to write if you are looking for day, evening, night or weekend shift.
If you have questions about the job, you are welcome to contact factory manager:
Poul Henrik Jespersen at +45 40 25 48 03
All inquiries are treated confidentially.
IPL Group consists of 3 high-tech companies: IPL, Ferrodan and Dana-Tank
We manufacture and offer technical solutions within castings, machined transmission elements and machine components, compressed air tanks and industrial tanks, which are sold in more than 40 countries - always based on the highest quality and the well-known quality brand IPL crown. IPL Group employs approx. 180 employees.
Kilde: Jobnet.dk
Information og data
Denne ledige stilling har jobtypen "Hardwarespecialist", og befinder sig i kategorien "Informationsteknologi".
Arbejdsstedet er beliggende i Lem St.
Jobbet er oprettet på vores service den 12.10.2022, men kan have været deaktiveret og genaktiveret igen.
Dagligt opdateret: Dette job opdateres dagligt ud fra jobudbyderens hjemmeside via vores søgemaskineteknologi og er aktivt lige nu.
- Hardwarespecialist
- Lem St
- Tirsdag den 06. december 2022
Lignende jobs
-
Automatikfagtekniker, elektriker el.lign. til vedl...
Vi søger en dedikeret automatikfagtekniker, elektriker el.lign., der med viden og engagement kan være med til at vedligeholde [xxxxx]s CNC-maskiner, så vi kan levere kvalitetsprodukter til rette t..Få mere info- Hardwarespecialist
- Lem St
-
CNC-operatør
Er du CNC-tekniker eller industritekniker, så er det måske dig vi søger til vores maskinfabrik.BIRN er specialister indenfor skræddersyet bearbejdning af støbejernsemner. Vores moderne maskinfabrik..Få mere info- Hardwarespecialist
- Holstebro
-
Industritekniker / Maskinarbejder
[xxxxx] søger en erfaren CNC-operatør til at arbejde med grønne løsninger inden for Power-to-X, vindindustrien og maritimt udstyr. Opgaverne inkluderer bl.a. dele til vindmøller og skibsudstyr. D..Få mere info- Hardwarespecialist
- Hvide Sande
-
Er du ekspert i CNC-fræsning? Vi søger en dygtig m...
Bliv en del af et team, hvor din erfaring med CNC-fræsning og Heidenhain-styring gør en forskel! Vi søger en erfaren medarbejder til CNC-fræsning med Heidenhain-styring, som kan tage ansvar for..Få mere info- Hardwarespecialist
- Tarm
Statistik over udbudte jobs som hardwarespecialister i Lem St
Herunder ser du udviklingen i udbudte hardwarespecialist i Lem St over tid. Bemærk at jobs der ikke har en bestemt geografi ikke er medtaget i tabellen. I den første kolonne ser du datoen. I den næste kolonne ser du det samlede antal hardwarespecialister.
Se flere statistikker her:
Statistik over udbudte hardwarespecialister i Lem St over tid
| Dato | Alle jobs som hardwarespecialister |
|---|---|
| 5. november 2024 | 1 |
| 4. november 2024 | 1 |
| 3. november 2024 | 1 |
| 2. november 2024 | 1 |
| 1. november 2024 | 1 |
| 31. oktober 2024 | 1 |
| 30. oktober 2024 | 1 |
| 29. oktober 2024 | 1 |
| 28. oktober 2024 | 1 |
| 27. oktober 2024 | 1 |
| 26. oktober 2024 | 1 |
| 25. oktober 2024 | 1 |
| 24. oktober 2024 | 1 |
| 23. oktober 2024 | 1 |
| 22. oktober 2024 | 1 |
| 21. oktober 2024 | 1 |
| 20. oktober 2024 | 1 |
| 19. oktober 2024 | 1 |
| 18. oktober 2024 | 1 |
| 17. oktober 2024 | 1 |
| 16. oktober 2024 | 1 |
| 15. oktober 2024 | 1 |
| 14. oktober 2024 | 1 |
| 13. oktober 2024 | 1 |
| 12. oktober 2024 | 1 |
| 11. oktober 2024 | 1 |
| 10. oktober 2024 | 1 |
| 9. oktober 2024 | 1 |
| 8. oktober 2024 | 1 |
| 7. oktober 2024 | 1 |
| 6. oktober 2024 | 1 |
Populære søgninger
Lignende søgeresultater
Kunderådgiver med salgstalent og fokus på kundeoplevelser i verdensklasse til vores kontor i Kolding
Se alle populære søgninger